Heavy Duty Riot Yoke 2.0 – 1.89 Or 2.30m (3mm Steel / 75mm Box Section)

Why choose the Heavy-Duty Riot Yoke 2.0?

• Made for commercial use – tough, sturdy 3mm steel 
• Interchangeable uprights 
• Disassembled quickly into easily portable parts

More than just a yoke

Invest in value without breaking the bank. This yoke extends your gym to a broader and dynamic training environment – you’ll buy more than just a yoke. It’s easily converted into a semi-stationary training station for basic strength lifts like squats, bench and presses, which increases the amount of different exercises possible, make sure the barbell you plan to use with this yoke has a shaft longer than 136cm, if you have the 1.89m version. Customizing the yokes with the narrow crossbeam will make it a good fit for standard barbells. With up to 600kg in loadable weight, this yoke is made to withstand top-level athletes’ attempts.

Safety First, Always

You won’t have to worry about stability with our yoke. Four red safety pins, with an extra bolt at the back ensure that the cross-beam is securely in place, while UHMW guiding inserts inside the cross-beam frame offer a tight, non-wobbly fit, protecting both the construction and the upright itself. 

And don’t forget about your floors – our small sled-type feet will help with the longevity of your flooring. If you need to move the yoke to a different location, like for competition or outdoor training, it can be easily disassembled into manageable pieces for hassle-free transportation. Convenience and durability are at the forefront. The loadable weight pins can be individually detached as well. Protective layers at the base of the loadable pins protect the plates as well as the yoke itself.

Customizable yoke uprights 

With an additional pair of uprights available as an add-on, you can upgrade the 1.89m yoke to the 2.30m version. For a more narrow yoke get the narrow crossbeam.

To add some grip to your yoke walk, use our performance Strongman Grip Shirt.

Specs

• 75mm x 75mm box section
• 25mm pin holes
• Finish: black powder coating
• Red security pins with an extra bolt in the back
• Laser cut numbering for every hole
• Removable loading pins
• UHMW guiding inserts
• Max. suggested load: 600kg
• Please note the narrow crossbeam comes without pins.

Please note: We recommend using weights on the pins at all times to increase the stability of the base. 

• Height weight pins: 28.5cm
• Loading pin diameter: 48mm (Calibrated Plates will not always fit)
• Diameter cross-beam: 8cm

Measurements of 189cm version

• Height: 189.5cm
• Length: 125cm
• Width: 135.4cm
• Width with narrow crossbeam: 125cm
• Weight: 71.4kg

Measurements of 230cm version

• Height: 230
• Length: 125cm
• Width: 135.4cm
• Width with narrow crossbeam: 125cm
• Weight: 83kg

FAQ

Are there any additional attachments or accessories available for this yoke?

Yes, you can attach multiple of our cage and rack accessories that are 75mm box section compatible. Note that only attachments made for 25mm pin holes are compatible (MRR attachments are not compatible). Please always make sure that the attachment does not compromise your safety.